Towards a sub-percent precision measurement of sin2 θ13 with reactor antineutrinos

Abstract

Abstract Measuring the neutrino mixing parameter sin2θ13 to the sub-percent precision level could be necessary in the next ten years for the precision unitary test of the PMNS matrix. In this work, we discuss the possibility of such a measurement with reactor antineutrinos. We find that a single liquid scintillator detector on a reasonable scale could achieve the goal. We propose to install a detector of ∼ 10% energy resolution at about 2.0 km from the reactors with a JUNO-like overburden. The integrated luminosity requirement is about 150 kton · GW · year, corresponding to 4 years’ operation of a 4 kton detector near a reactor complex of 9.2 GW thermal power like Taishan reactor. Unlike the previous θ13 experiments with identical near and far detectors, which can suppress the systematics especially the rate uncertainty by the near-far relative measurement and the optimal baseline is at the first oscillation maximum of about 1.8 km, a single-detector measurement prefers to offset the baseline from the oscillation maximum. At low statistics ≲ 10 kton · GW · year, the rate uncertainty dominates the systematics, and the optimal baseline is about 1.3 km. At higher statistics, the spectral shape uncertainty becomes dominant, and the optimal baseline shifts to about 2.0 km. The optimal baseline keeps being ∼ 2.0 km for an integrated luminosity up to 106 kton · GW · year. Impacts of other factors on the precision sin2θ13 measurement are also discussed. We have assumed that the TAO experiment will improve our understanding of the spectral shape uncertainty, which gives the highest precision measurement of reactor antineutrino spectrum for neutrino energy in the range of 3–6 MeV. We find that the optimal baseline is ∼ 2.9 km with a flat input spectral shape uncertainty provided by the future summation or conversion methods’ prediction. The shape uncertainty would be the bottleneck of the sin2θ13 precision measurement. The sin2θ13 precision is not sensitive to the detector energy resolution and the precision of other oscillation parameters.