Abstract
AbstractBrazing in a continuous belt furnace is a quite cost-effective way of joining components consisting of many individual parts. It is extensively used in many industrial sectors like the automotive or in the energy industry. Even though many components are cyclically loaded during service up to now, no approaches to assess the lifetime under in-service loads are available. In order to assess the fatigue strength of brazed joints, three different specimen types have been investigated: peel and shear as well as a component-like specimens. The specimens were characterized and tested under load control using constant and variable amplitudes. Subsequently, the fatigue life of these joints was assessed by linear-elastic notch stresses. A reference S-N curve and characteristic damage sums were derived that enable to perform a reliable fatigue assessment. Further parameters which seem to have a strong influence on the fatigue life, the surface topology, and the overall quality of the braze were identified. Their influence is discussed.
Publisher
Springer Science and Business Media LLC
Subject
Metals and Alloys,Mechanical Engineering,Mechanics of Materials
Reference25 articles.
1. Baumgartner J, Bruder T (2013) An efficient meshing approach for the calculation of notch stresses. Weld World 57:137–145. https://doi.org/10.1007/s40194-012-0005-3
2. Baumgartner J, Waterkotte R (2015) Crack initiation and propagation analysis at welds - assessing the total fatigue life of complex structures. Materialwiss Werkstofftech 46(2):123–135. https://doi.org/10.1002/mawe.201400367
3. Baumgartner J, Lipp K, Bruder T, Kaufmann H (2011) Design methods for reliable fatigue assessment of pm components. Materialwiss Werkstofftech 42(10):894–903. https://doi.org/10.1002/mawe.201100869
4. Baumgartner J, Schmidt H, Ince E, Melz T, Dilger K (2015) Fatigue assessment of welded joints using stress averaging and critical distance approaches. Weld World 59(5):731–742. https://doi.org/10.1007/s40194-015-0248-x
5. Baumgartner J, Tillmann W, Bobzin K, Wojarski L, Öte M, Manka M, Wiesner S, Sievers N (2016) Fatigue strength of brazed components considering the influence of brazing quality, mean stresses and loading type. In: DVS Berichte Band 325: LÖT 2016 - Brazing, high temperature brazing and diffusion bonding. DVS Media GmbH, Düsseldorf, pp 123–132
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献