The influence of stirring time and frequency of impeller rotation on evaluation of drops dimensions and rheological properties of the multiple emulsion

Abstract

AbstractThe analysis of drops and rheological measurements of the emulsion produced were presented in the article. The influence of stirring time and rotation frequency on the drops size of the emulsion produced in the propeller of diameter D = 0.1 m and liquid height H = 0.5D equipped with four standard flat dividers was defined. The Smith turbine stirrer was used to stir the emulsion produced. The drop size was defined for three different propeller rotation frequencies, 500 rpm, 1000 rpm and 1500 rpm. The stirring time, after which the samples were collected, was accordingly 15 min and 45 min. To produce the emulsion, sunflower oil was used in the oil phase and distilled water in the water phase. There were 6 measurement series all together, and they were presented as the diameter size distribution. The mean arithmetic diameter da, median dm and the mean Sauter diameter d32 were determined. The rheological measurements of the produced emulsions were presented in graphics as a function τ = f(γ) and were described as Herschel–Bulkley and Bingham models presented in Table 3.