Vivaldi End-Fire Antenna for THz Photomixers

Abstract

AbstractWe propose a broadband end-fire antenna for continuous-wave terahertz (THz) photomixing–based devices working in the frequency range of 0.5–1 THz. A compact Vivaldi antenna is presented that does not require any hyper-hemispherical silicon lens to collect and collimate THz radiation unlike the conventionally used broadside antennas. The antenna is tailored to radiate THz into or receive radiation from a dielectric waveguide placed in close vicinity of it. The antenna is fabricated on an indium phosphide (InP) substrate. A silicon (Si) superstrate is used to improve the directionality of the radiated beam. THz power coupled into Si waveguides is measured using two different techniques between 0.1 and 1.15 THz. Firstly, the waveguide is placed in the optical path of a 1550 nm based continuous-wave THz setup with a commercial broadside emitter, focusing optics, and a detector fabricated on the InP substrate with log-periodic broadside antenna. Secondly, the waveguide is placed in direct contact with the designed Vivaldi antenna–based THz receiver and using the commercial broadside emitter as a source. It is observed that the direct coupling technique using the Vivaldi end-fire antenna outperforms the optically coupled approach at frequencies higher than 668 GHz. Efficient THz photoconductive sources and receivers based on the designed compact Vivaldi end-fire antenna will be suitable for launching THz power into on-chip THz circuitry and for compact THz systems.