Investigation of biomass components on the slow pyrolysis products yield using Aspen Plus for techno-economic analysis

Abstract

AbstractPrior information on the pyrolysis product behaviour of biomass components-cellulose, hemicellulose and lignin is critical in the selection of feedstock as components have a significant influence on the pyrolysis products yield. In this study, the effect of biomass components on the yield of slow pyrolysis products (char, bio-oil and syngas) is investigated using a validated ASPEN Plus® model. The model is simulated at a temperature of 450 °C, a heating rate of 10 °C/min and a solid residence time of 30 min. The results indicated that at the given conditions, lignin contributed 2.4 and 2.5 times more char yield than cellulose and hemicellulose. The hemicellulose contributed 1.33 times more syngas yield than lignin while the cellulose and hemicellulose contributed 8.67 times more bio-oil yield than lignin. Moreover, the cost involved in the production of char using lignin (110 $/ton) is significantly economical than using cellulose (285 $/ton) and hemicellulose (296 $/ton). The net CO2 emission of lignin pyrolysis is 4.14 times lower than cellulose pyrolysis and 3.94 times lower than hemicellulose pyrolysis. It can be concluded that lignin pyrolysis is more advantageous than cellulose and hemicellulose pyrolysis. In the selection of feedstock for the slow pyrolysis, the feedstock with more lignin content is preferred. Graphical abstract