A comprehensive review on the effect of turbulence promoters on heat transfer augmentation of solar air heater and the evaluation of thermo-hydraulic performance using metaheuristic optimization algorithms

Abstract

AbstractSolar air heaters are characterized by poor thermal performance due to limited heat transfer capability of air, thereby necessitating the need for design modifications. Among a different system performance augmentation technique, turbulence promotors are widely used owing to its effectiveness. Based on design parameters such as geometry, size, pitch and arrangement of turbulence promoters, varying levels of heat transfer increment with the pressure drop penalty is achievable. This led to the development of new designs which could offer on optimum thermo-hydraulic performance for a wide range of Reynolds number. Such research invariably requires a thorough insight of data related to various design parameters and optimal thermal–hydraulic performance range. This article provides a detailed overview of various turbulence promotor designs and their optimal thermal–hydraulic performance ranges compiled from a wide spectrum of experimental and numerical studies. Apart from outlining the general flow characteristics of each turbulator design, this study also evaluates different metaheuristic optimization algorithm such as bonobo optimization (BO), particle swarm optimization and teaching–learning-based optimization algorithm for enhancing the thermal–hydraulic performance parameter (THPP). The study shows that the BO algorithm does not exhibit local trapping due to its self-adapting nature of the optimized parameters which makes it a promising choice for THPP optimization studies in air heater applications. The extensive review also shows that the arrangement pattern of rib turbulator plays a key role in thermo-hydraulic performance augmentation. Based on the BO optimization analysis, the range of THPP is determined for the optimized geometry of turbulence promoters. In the pool of rib design, transverse prism rib, multi-V-rib, multi-V-shaped rib with staggered rib, sinewave-shaped rib with gap and S-shaped ribs exhibits an optimal THPP range of 2.05–3.32, 2.43–2.94, 3.00–3.61, 1.58–3.40 and 2.05–3.74, respectively. Other turbulence promotor designs such as winglet vortex generator, dimple protrusion in arc shape and multi-V-baffles exhibits optimal THPP range of 1.95–2.2, 2.44–3.68 and 1.75–2.01, respectively. At the end, the study proposes key research gaps such as the use of combined ribs and vortex generators and discrete fin arrays of different geometry as future scope of research. Graphical abstract