Author:
Ott Michael,Mayer Moritz,Li Yiran,Steinlehner Florian,Zaeh Michael F.,Volk Wolfram
Publisher
Springer Nature Switzerland
Reference26 articles.
1. Wang, Z.-J., Chen, W.-Y., Zhang, Y.-D., et al.: Study on the machining distortion of thin-walled part caused by redistribution of residual stress. Chinese J. Aeronaut. 18, 175–179 (2005). https://doi.org/10.1016/S1000-9361(11)60325-7
2. Groeneveld, H., Mordechai, C.: Airplane Cockpit Reduced from Two Hundred Parts to One: Sheet Metal Simulation Tested for Explosive Forming in Aerospace. https://formingworld.com/aerospace-autoform-3d-metal-forming/ (2021). Last accessed 19 Apr 2023
3. Liu, L., Sun, J., Chen, W., et al.: Study on the machining distortion of aluminum alloy parts induced by forging residual stresses. Proc. Inst. Mech. Eng., Part B 231, 618–627 (2017). https://doi.org/10.1177/0954405415583805
4. van den Berg, N., Xin, H., Veljkovic, M.: Effects of residual stresses on fatigue crack propagation of an orthotropic steel bridge deck. Mater. Des. 198, 109294 (2021). https://doi.org/10.1016/j.matdes.2020.109294
5. Ball, D.L., James, M., Bucci, R.J., et al.: The impact of forging residual stress on fatigue in aluminum. In: 56th AIAA/ASCE/AHS/ASC Structural Structural Dynamics Material Conference (2015). https://doi.org/10.2514/6.2015-0386