1. Drücker, S., Inman, S., Fiedler, B.: Simulation and optimization of the load introduction geometry of additively manufactured lattice structure specimens. In: ECCM 2018 - 18th European Conference on Composite Materials (2020)
2. Alsalla, H., Hao, L., Smith, C.: Fracture toughness and tensile strength of 316L stainless steel cellular lattice structures manufactured using the selective laser melting technique. Mater. Sci. Eng. A (2016). https://doi.org/10.1016/j.msea.2016.05.075
3. Liu, W., Li, Y., Liu, B., Wang, G.: Development of a novel rectangular–circular grid filling pattern of fused deposition modeling in cellular lattice structures. Int. J. Adv. Manufact. Technol. (2020). https://doi.org/10.1007/s00170-020-05461-0
4. Neff, C., Hopkinson, N., Crane, N.B.:. Selective laser sintering of diamond lattice structures: Experimental results and FEA model comparison. In: Proceedings - 26th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2015 (2020)
5. Gümüs, S., et al.: Failure behavior of PA12 based SLS lattice structure with macro-porosity. In: MATEC Web of Conferences (2018). https://doi.org/10.1051/matecconf/201818803007