Reuse of Electric Arc Furnace Slag as Filler for Nitrile Butadiene Rubber

Abstract

Abstract This work shows an innovative application for electric arc furnace (EAF) slag: its use as a filler for nitrile butadiene rubber (NBR). Composites with various EAF slag contents were tested. It was found that the polymer matrix significantly reduces the leaching of slag (determined according to the standard CEN-EN 12457-2) incorporated in the NBR. The processability characteristics determined by the rheometric curves highlight that the EAF slag accelerates the crosslinking kinetics, reducing the production cycle time. Mechanical characterization demonstrated that EAF slag increases hardness and compression modulus. The ability to recover an imposed deformation quantified by the compression set is reduced as the EAF slag amount increases but remains below an acceptable value. It can be stated that in sealing systems, the EAF slag as a filler for NBR positively affects the compound properties. Moreover, NBR filled with EAF slag also has magnetic properties compared with standard rubber.