Dressing of hybrid-bonded graded diamond grinding wheels

Abstract

AbstractFor tool grinding, an optimization potential in terms of productivity is available using graded grinding wheels. This is especially the case when grinding flutes in cemented carbide. Due to the properties of the cemented carbide, high radial wear occurs. Depending on the geometry of the flute, the radial wear varies along the engagement width of the grinding tool. The varying radial wear can be compensated by load adapting the grinding tool properties along its engagement width. The adaptation of the wear behaviour to non-uniform engagement conditions results in non-uniform radial wear occurring under uniform engagement conditions. Indeed, this is the case when dressing these grinding tools. Therefore, this publication presents a method that enables the dressing of graded grinding wheels. For this purpose, four differently graded grinding wheels and two non-graded grinding wheels are dressed with SiC-rolls. Different SiC-rolls, as well as dressing parameters, are investigated. The contour accuracy after dressing is analysed using contour profiles in polyurethane. In the presented paper, dressing parameters are proposed which allow reproducible dressing of all grinding wheels used.