Silicone rubber composite reinforced by bismuth tungsten oxide as an effective gamma ray protective materials

Abstract

AbstractThe workers’ continual exposure to nuclear radiation makes it indispensable to invent and form lightweight materials as flexible radiation shields. So, in this article, silicone rubber SR inlaid with varying filler ratios of bismuth tungsten oxide Bi2(WO4)3 was produced. Mechanical properties, hardness, tensile strength, tensile modulus, and elongation at break, of the SR/Bi2(WO4)3 composites were studied as a function of filler concentration and irradiation dose. The Bi2(WO4)3 filler enhanced these properties. On the other hand, with augmentation of irradiation dose, hardness of the SR/Bi2(WO4)3 composites increased and the other mechanical properties decreased. Under accurate geometry conditions, the gamma ray attenuation coefficients of the SR/Bi2(WO4)3 composites were studied at the energies 661.66, 1173.24, and 1332.5 keV. The attenuation parameters, linear attenuation coefficients $$\mu$$ μ , experimental mass attenuation coefficients $${\sigma }_{exp.}$$ σ e x p . , and half value layer HVL results revealed that the attenuation ability of the composite was enhanced with the increase of Bi2(WO4)3 concentration. The results of $${\sigma }_{exp.}$$ σ e x p . were confirmed through their congruence with the theoretical calculations of mass attenuation coefficients $${\sigma }_{theo.}$$ σ t h e o . Considering the merits of lightweight, high mechanical properties, superior attenuation ability, and appropriate irradiation resistance, the produced SR/Bi2(WO4)3 composite is suitable as durable and flexible gamma ray shields such as anti-radiation coats, gloves, shoes.