Liquid Cooling of Fuel Cell Powered Aircraft: The Effect of Coolants on Thermal Management

Abstract

Abstract Electric propulsors powered by Proton Exchange Membrane Fuel Cells (PEMFCs) offer a net zero solution to aircraft propulsion. Heat generated by the PEMFCs can be transferred to atmospheric air via a liquid cooling system; however, the cooling system results in parasitic power and adds mass to the propulsion system, thereby affecting system specific power. The design of the cooling system is sensitive to the choice of liquid coolant and so informed coolant selection is required if associated parasitic power and mass are to be minimized. Two approaches to selection of coolants for PEMFC-powered aircraft are presented in this paper for operating temperatures in the range 80–200 °C (this covers low, intermediate, and high temperature PEMFCs). The first approach uses a figure of merit (FoM) alongside minimum and maximum operating temperature requirements. The FoM supports the selection of coolants that minimize pumping power and mass while maximizing heat transfer rate. The second approach uses a cooling system model to select “Pareto efficient” coolants. A hybrid-electric aircraft using a PEMFC stack is used as a representative case study for the two approaches. Hydrocarbon-based coolants are shown to be favorable for the case study considered here (aromatics for PEMFCs operating at <130 °C and aliphatics for PEMFCs operating at >130 °C). As the PEMFC operating temperature increases, the parasitic power and mass of the Thermal Management System (TMS) decreases. Operating at elevated temperatures is therefore beneficial for liquid cooled PEMFC-powered aircraft. Nevertheless, there are diminishing performance gains at higher operating temperatures.