The Effect of Swirl Number on Lean Blow Out Limits of Lean Direct Injection Combustors

Author:

Aradhey Yogesh1,Stroud Zachary1,Meadows Joseph1ORCID

Affiliation:

1. Department of Mechanical Engineering, Virginia Polytechnic Institute and State University , 445 Goodwin Hall (MC 0238), 635 Prices Fork Road, Blacksburg, VA 24061

Abstract

Abstract This is the first study where a single variable sweep of SN is conducted to assess its impact on lean blowout limits (LBO) in a liquid-fueled lean direct injection (LDI) combustor. This study uses a scaled NASA SV-LDI (Swirl Venturi—Lean Direct Injection) hardware and is concerned with the impact of swirl number on the lean blow-out limit of a single-element LDI system at atmospheric pressure. The swirl numbers (SN) were varied from 0.31 to 0.66 using continuously variable active swirl number control system that was developed in-house. It is shown that the minimum operating equivalence ratio is a linearly increasing function of swirl number. While previous literature agrees with the positive slope for this correlation, past work has suggested that the LBO limit is proportional to the swirler vane angle which is shown to be untrue for LDI systems. By actively varying the swirl number, it is proven that LBO is proportional to SN, and it is well known that SN is not proportional to swirler vane angle. Increased SN reduces LBO margin because the better-mixed, high swirl dilutes locally rich pockets of fuel–air mixture in a globally lean flow. In addition to a baseline venturi, which was scaled from NASA's geometry, two other venturis were tested. A low-pressure loss venturi with a large throat diameter showed poor blow-out performance whereas a parabolically profiled venturi improved LBO over the baseline for the same swirl number.

Publisher

ASME International

Reference25 articles.

1. Investigations of Multiple Swirl-Venturi Fuel Injector Concepts: Recent Experimental Optical Measurement Results for 1-Point, 7-Point, and 9-Point Configurations,2015

2. A Third-Generation Swirl-Venturi Lean Direct Injection Combustor With a Prefilming Pilot Injector,2019

3. Swirl-Venturi Lean Direct Injection Combustion Technology for Low-NOx Aero Gas Turbine Engines,2018

4. A Second Generation Swirl-Venturi Lean Direct Injection Combustion Concept,2014

5. A Comparison of Three Second-Generation Swirl-Venturi Lean Direct Injection Combustor Concepts,2016

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3