Numerical Modeling of Stress in Stenotic Arteries With Microcalcifications: A Parameter Sensitivity Study

Abstract

As a follow-up to the work presented in Wenk et al. (2010, “Numerical Modeling of Stress in Stenotic Arteries With Microcalcifications: A Micromechanical Approximation,” ASME J. Biomech. Eng., 132, p. 091011), a formal sensitivity study was conducted in which several model parameters were varied. The previous work only simulated a few combinations of the parameters. In the present study, the fibrous cap thickness, longitudinal position of the region of microcalcifications, and volume fraction of microcalcifications were varied over a broader range of values. The goal of the present work is to investigate the effects of localized regions of microcalcifications on the stress field of atherosclerotic plaque caps in a section of carotid artery. More specifically, the variations in the magnitude and location of the maximum circumferential stress were assessed for a range of parameters using a global sensitivity analysis method known as Sobol' indices. The stress was calculated by performing finite element simulations of three-dimensional fluid-structure interaction models, while the sensitivity indices were computed using a Monte Carlo scheme. The results indicate that cap thickness plays a significant role in the variation in the magnitude of the maximum circumferential stress, with the sensitivity to volume fraction increasing when the region of microcalcification is located at the shoulder. However, the volume fraction played a larger role in the variation in the location of the maximum circumferential stress. This matches the finding of the previous study (Wenk et al., 2010, “Numerical Modeling of Stress in Stenotic Arteries With Microcalcifications: A Micromechanical Approximation,” ASME J. Biomech. Eng., 132, p. 091011), which indicates that the maximum circumferential stress always shifts to the region of microcalcification.