Affiliation:
1. School of Mechanical Engineering, Purdue University, West Lafayette, IN
Abstract
Tool-chip interface temperature is analyzed experimentally during turning of 4140 steel alloy and Inconel 718 with tungsten carbide tools using a tool-work thermocouple technique. The experimental results are compared with Loewen and Shaw’s analytical results. Based on the experimental results, an empirical model relating the tool face temperature to cutting conditions is established for 4140 steel alloys with tungsten carbide tools. Finally, the tool-chip interface is investigated with flank and crater wear to determine the effect of tool face temperature on these tool wear mechanisms.
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Control and Systems Engineering
Reference25 articles.
1. Alvelid
B.
, 1970, “Cutting Temperature Thermo-electrical Measurements,” Annals of the C.I.R.P., Vol. 18, pp. 547–554.
2. Barrow
G.
, 1973, “A Review of Experimental and Theoretical Techniques for Assessing Cutting Temperatures,” Annals of the C.I.R.P., Vol. 22, pp. 203–211.
3. Braiden, P. M., 1967, “The Calibration of Tool-Work Thermocouples,” Proceedings of the 8th International Machine Tool Design and Research Conference, pp. 653–666.
4. Bus, C., Touwen, A. L., Veenstra, P. C., and Van Der Wolf, A. C. H., 1971, “Thermoelectric Characteristics of Carbides,” Proceedings of the 12th International Machine Tool Design and Research Conference, pp. 397–400.
5. Byrne
Gerry
, 1987, “Thermoelectric Signal Characteristics and Average Interfacial Temperatures in the Machining of Metals under Geometrically Defined Conditions,” International Journal of Machine Tools for Manufacturing, Vol. 27, No. 2, pp. 215–224.
Cited by
50 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献