Wear and Friction Mechanism of Stainless Steel 420 Under Various Lubrication Conditions: A Tribological Assessment With Ball on Flat Test-Reference-Cited by-同舟云学术

Wear and Friction Mechanism of Stainless Steel 420 Under Various Lubrication Conditions: A Tribological Assessment With Ball on Flat Test

Published:2022-12-26 Issue:4 Volume:145 Page:
ISSN:0742-4787
Container-title:Journal of Tribology
language:en
Short-container-title:

Author:

Gupta Munish Kumar¹,Demirsöz Recep²,Korkmaz Mehmet Erdi²,Ross Nimel Sworna³

Affiliation:

1. Opole University of Technology Faculty of Mechanical Engineering, , 76 Proszkowska St., 45-758 Opole , Poland

2. Karabük University Department of Mechanical Engineering, , Karabük 78050 , Turkey

3. SIMATS Department of Mechanical Engineering, Saveetha School of Engineering, , Chennai 602105, Tamil Nadu , India

Abstract

Abstract The application of stainless steel 420 is noted in various industrial sectors such as aerospace, automobile etc. However, the wear mechanism of stainless steel 420 is greatly affected by the use of 100Cr6 balls due to the adhesion and abrasion mechanism generated between the contact surfaces. In this work, the ball-on-flat experiments were performed on stainless steel-420 versus 100cr6 friction pairs under dry, minimum quantity lubrication (MQL) and pool conditions. Then, the wear studies in terms of volume loss, profile tracks, micrographs, coefficient of friction, etc. were performed. The results demonstrated that the MQL and pool conditions help to improve the tribological properties of stainless steel 420 alloy against 100Cr6 ball.

Funder

Narodowe Centrum Nauki

Publisher

ASME International

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials

Link

https://asmedigitalcollection.asme.org/tribology/article-pdf/145/4/041703/6969828/trib_145_4_041703.pdf

Reference47 articles.

1. Austenite Formation and Microstructural Control in Low-Alloy Steels

2. Evolution of Substructure in Low-Interstitial Martensitic Stainless Steel During Tempering;Niessen;Mater. Charact.,2020

3. Microstructural Characterization and Investigation of Slurry Erosion Performance of Cyclically Heat Treated Martensite Steel;Singh;Eng. Fail. Anal.,2022