Affiliation:
1. Dept. of Mechanical Engineering, Sherbrooke University, 2500 University blvd., Sherbrooke, Que´bec, Canada, JIK 2R1
Abstract
This Tech Brief addresses the effects of shear deformation and rotary inertia on the free vibration of a rotating annular plate. Several studies have been done to understand these effects (Irie et al, 1982; Sinha, 1987). In particular, the importance of these terms is well known for disks with a thickness ratio h/a > 0.05 where h is the thickness of the disk and a is its outer radius. However, there is a need to show how they affect the disk vibration as the thickness ratio increases. It is well accepted that shear deformation and rotary inertia should be included in the analysis when h/a > 0.05 (Batoz and Dhatt, 1990). However, this Tech Brief will show that this criterion is not valid for all the modes. It will present the evolution of the number of modes correctly evaluated versus the thickness ratio, and, finally, will give a heuristic criterion to predict when it is necessary to consider shear deformation and rotary inertia.
Reference5 articles.
1. Barasch
S.
, and ChenY., 1972, “On the Vibrations of a Rotating Disk,” ASME Journal of Applied Mechanics, Vol. 39, pp. 1143–1144.
2. Batoz, J-L., and Dhatt, G., 1990, Mode´lisation des Structures par E´le´ments Finis, Volume 2, HERMES.
3. Coˆte´, A., 1993, “Re´ponse Vibratoire et Acoustique d’un Disque Annulaire Non-Baffle´ en Rotation,” Master’s Thesis, Sherbrooke University, Sherbrooke, Que´bec, Canada.
4. Irie
T.
, YamadaG., and TakagiK., 1982, “Natural Frequencies of Thick Annular Plates,” ASME Journal of Applied Mechanics, Vol. 49, pp. 633–638.
5. Sinha
S. K.
, 1987, “Determination of Natural Frequencies of a Thick Spinning Annular Disk Using a Numerical Rayleigh-Ritz’s Trial Functions,” Journal of the Acoustical Society of America, Vol. 81, pp. 357–369.
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献