A Numerical Simulation of Fretting Wear considering the Dynamic Evolution of Debris for the Coated Contact Surface

Abstract

Abstract In this paper, a multi-layer body model in which material properties and wear coefficient change with node coordinates is proposed, so that the wear profile is not restricted by the singularity of the interface of the coated contact pairs. The conversion rate of the adhered particles was obtained to describe the growth and expansion of the debris at the fretting interface based on experiments, and the wear model of coated contact pair considering the dynamic evolution of the debris layer was established. By comparing the previous experimental and computational results, the wear calculation method proposed in this paper is more reasonable to predict the wear profile of the coated contact pair. In addition, the influence of the debris layer on the wear depth, friction width, and contact pressure in the fretting process is analyzed, indicating that the existence of the debris layer can delay the wear process. Finally, the fretting wear life of the SCMV steel contact pair deposited with the W-DLC coating is estimated.