Multidisciplinary Optimization of Thermodynamic Cycles for Large-Scale Heat Pumps With Simultaneous Component Design

Abstract

Abstract The performance of high temperature heat pumps (HTHPs) is highly dependent on the efficiency of its main components, which need to be optimally matched especially in closed cycles. The design process is therefore a challenging task as many disciplines and varying modeling depths need to be considered. Consequently, this is usually a sequential procedure beginning with cycle definition and raising the fidelity for component design. Fundamental design decisions are made based on assumptions for component performance. Mistakes in the phase of cycle definition are hard to reverse in later design stages. Therefore, this work introduces holistic approaches to the multidisciplinary design of closed Brayton cycles. Aerodynamic compressor design with two-dimensional throughflow analysis and geometry-based heat exchanger sizing are simultaneously optimized with thermodynamic cycle parameters. The presented methodologies make use of highly sophisticated design tools drawing on many years of experience in gas turbine design. The results demonstrate that holistic heat pump optimization can be successfully performed with reasonable computational effort. The advantages compared to conventional sequential design are elaborated. A comparison of two optimization concepts indicates that splitting up the design vectors of cycle and components shows the tendency to improve robustness. Finally, the tradeoff between system compactness and performance is demonstrated with a multi-objective optimization study.