Affiliation:
1. e-mail:
2. e-mail: Department of Chemical Engineering, Brigham Young University, Provo, UT 84602
Abstract
Time-dependent deposition characteristics of fine coal fly ash were measured in the Turbine Accelerated Deposition Facility (TADF) at Brigham Young University. Two samples of subbituminous coal fly ash, with mass mean diameters of 3 μm and 13 μm, were entrained in a hot gas flow with a gas temperature of 1288 °C and Mach number of 0.25. A nickel-based, superalloy metal coupon approximately 0.3 cm thick was held in a hot particle-laden gas stream to simulate deposition in a gas turbine. Tests were conducted with deposition times of 20, 40, and 60 min. Capture efficiencies and surface roughness characteristics (e.g., Ra) were obtained at different times. Capture efficiency increased exponentially with time, while Ra increased linearly with time. The increased deposition with time caused the surface temperature of the deposit to increase. The increased surface temperature caused more softening, increasing the propensity for impacting particles to stick to the surface. These data are important for improving models of deposition in turbines from syngas flows.
Reference14 articles.
1. The Role of Igcc in Co2 Abatement;Energy Convers. Manage.,1997
2. Clean Coal Technology for Power and Cogeneration;Fuel,1994
3. The Future Challenges for “Clean Coal Technologies”: Joining Efficiency Increase and Pollutant Emission Control;Energy,2009
4. Effects of Particle Size, Gas Temperature, and Metal Temperature on High Pressure Turbine Deposition in Land Based Gas Turbines from Various Synfuels;IGTI,2007
5. Computational Analysis of Conjugate Heat Transfer and Particulate Deposition on a High Pressure Turbine Vane,2009
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献