Modeling and Dynamical Feedback Control of a Vehicle Diesel Engine Speed and Air-Path
-
Published:2014-08-08
Issue:6
Volume:136
Page:
-
ISSN:0022-0434
-
Container-title:Journal of Dynamic Systems, Measurement, and Control
-
language:en
-
Short-container-title:
Author:
Wang Haoping1, Tian Yang1, Bosche Jérôme2, El Hajjaji Ahmed2
Affiliation:
1. Sino-French International Joint Laboratory of Automatic Control and Signal Processing, Automation School, Nanjing University of Science and Technology, 200 Xiao Ling Wei, Nanjing 210094, China e-mail: 2. Modeling, Information, and Systems Laboratory, Université de Picardie Jules Verne, 7 Rue du Moulin Neuf, Amiens 80000, France e-mail:
Abstract
This paper presents a modeling and dynamical feedback stabilization control of a diesel engine which is equipped with a variable geometry turbocharger (VGT) and exhaust gas recirculation (EGR) valve. A fourth-order dimensional nonlinear model which takes into account the engine crankshaft speed dynamics and the air-path dynamics is proposed for the considered diesel engine. The difficulties for the control design are that the referred system is nonlinear, nonminimum phase unstable and coupled system. The fuel flow rate Wf which is considered as input for the engine crankshaft subsystem and acts as an external perturbation for the three-order dimensional nonminimum phase air-path subsystem. The global control objectives are to track desired values of engine speed, intake manifold pressure and compressor flow mass rate which can be suitably chosen according to low emission criterions. For the considered objectives, a dynamical feedback stabilization control with a two-loop structure of inner outer loop is proposed. The inner loop considers a control based on a Lyapunov function which realizes the desired engine speed trajectory tracking. The outer loop which is developed from a particular extended nonlinear air-path subsystem with its modified outputs concerns the coordinated EGR and VGT control and ensures both the desired intake manifold pressure and the desired compressor mass flow rate trajectory tracking. Meanwhile, this outer loop dynamical feedback stabilization control provides also the external fuel mass flow rate perturbation rejection. From the corresponding numerical simulation results, the proposed method efficiency is validated.
Publisher
ASME International
Subject
Computer Science Applications,Mechanical Engineering,Instrumentation,Information Systems,Control and Systems Engineering
Reference27 articles.
1. Kocher, L. E., Stricker, K., Alstine, D. G. V., Koeberlein, E., and Shaver, G. M., 2012, “Oxygen Fraction Estimation for Diesel Engines Utilizing Variable Intake Valve Actuation,” IEEE American Control Conference (ACC), Montreal, Canada, June 27–29, pp. 4963–4968. 2. Liu, Z., Jiang, P., Ouyang, G., and Zhou, J., 2010, “Development of an Electromechanical Model for Piezo Actuated Common Rail Injectors,” 2010 International Conference on Intelligent Computation Technology and Automation (ICICTA), Changsha, China, May 11–12, pp. 98–101.10.1109/ICICTA.2010.279 3. Turbocharged Diesel Engine Modeling for Nonlinear Engine Control and Estimation;ASME J. Dyn. Syst., Meas., Control,1995 4. Constructive Lyapunov Control Design for Turbocharged Diesel Engine;IEEE Trans. Control Syst. Technol.,2000 5. Herceg, M., Raff, T., Findeisen, R., and Allgower, F., 2003, “Nonlinear Model Predictive Control of a Turbocharged Diesel Engine,” IEEE International Conference on Control Application, Munich, Germany, October 4–6, pp. 2766–2771.10.1109/CACSD-CCA-ISIC.2006.4777076
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|