Affiliation:
1. NASA Glenn Research Center, Cleveland, OH 44135
Abstract
Turbine vane heat transfer distributions obtained using an infrared camera technique are described. Infrared thermography was used because noncontact surface temperature measurements were desired. Surface temperatures were 80°C or less. Tests were conducted in a three-vane linear cascade, with inlet pressures between 0.14 and 1.02 atm, and exit Mach numbers of 0.3, 0.7, and 0.9, for turbulence intensities of approximately 1 and 10 percent. Measurements were taken on the vane suction side, and on the pressure side leading edge region. The designs for both the vane and test facility are discussed. The approach used to account for conduction within the vane is described. Midspan heat transfer distributions are given for the range of test conditions.
Reference24 articles.
1. Dunn, M. G., Kim, J., Civinskas, K. C., and Boyle, R. J., 1994, “Time-Averaged Heat Transfer and Pressure Measurements and Comparison With Prediction for a Two-Stage Turbine,” ASME J. Turbomach., 116, pp. 14–22.
2. Blair, M. F. , 1994, “An Experimental Study of Heat Transfer in a Large-Scale Turbine Rotor Passage,” ASME J. Turbomach., 116, pp. 1–13.
3. Tarada, F., 1987, “Heat Transfer to Rough Turbine Blading,” PhD thesis, University of Sussex, England.
4. Tarada, F., and Suzuki, M., 1993, “External Heat Transfer Enhancement to Turbine Blading Due to Surface Roughness,” ASME Paper No. 93-GT-74.
5. Abuaf, N., Bunker, R. S., and Lee, C. P., 1998, “Effects of Surface Roughness on Heat Transfer and Aerodynamic Performance of Turbine Airfoils,” ASME J. Turbomach., 120, pp. 522–529.
Cited by
18 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献