Infiltration and Soil Water Distribution in Irrigation Furrows Treated with Polyacrylamide

Abstract

HighlightsControl furrows with 1× inflow rates were compared with 3× advance inflows treated with 10 mg L-1 polymer (WSPAM).WSPAM reduced sediment loads in furrow streams by 89%, despite its 3× greater advance inflows.WSPAM furrow advance times and infiltrated volumes were greater than predicted from increased inflows alone.WSPAM enabled reduced upper-section infiltration and increased lower-section infiltration relative to control furrows.Abstract. Few if any studies have measured the effects of water-soluble anionic polyacrylamide (WSPAM) on infiltration and soil water distribution in different segments of irrigation furrows. We conducted a four-year study on a silt loam soil with 1.5% slopes. Control furrows received no WSPAM and inflows were 15.1 L min-1, whereas WSPAM was applied using 10 mg L-1 a.i. to 45 L min-1 inflows during furrow advance. Despite its greater advance phase inflow rates, WSPAM application reduced sediment concentrations in furrow streams by an average of 89% relative to the control. A surface irrigation model, WinSRFR 5.1, was used to separate furrow inflow rate effects on infiltration from that of WSPAM. Relative to results predicted by simulation for the entire furrow, the polymer treatment: (1) increased advance time an average 1.4-fold, (2) increased advance-phase infiltrated volume 1.5-fold, and (3) increased infiltration volume at the common opportunity time 1.2-fold. Hence, these effects resulted from WSPAM and not from differences in treatment inflow rates. Treatment infiltration amounts varied markedly among irrigations and years, as did the intensity of WSPAM effects. These were attributed mainly to differences in infiltration opportunity time, but temporal differences in soil water content during furrow formation, irrigation water electrical conductivity, initial soil surface water content and water temperature, and the irrigation-long, furrow-stream mean sediment content also appear to have influenced infiltration rates. Although inconsistent, WSPAM increased net furrow infiltration in the lower section and reduced infiltration in the upper section relative to control furrows. This effect could not be explained by the greater inflow rate and shorter advance time of the WSPAM treatments and was attributed to spatially variable WSPAM effects on infiltration opportunity time and possibly irrigation water viscosity. The WSPAM management approach, while protecting against furrow erosion, may potentially provide a means of improving irrigation uniformity and reducing associated percolation water and nutrient losses. Keywords: Furrow advance, Irrigation, Irrigation uniformity, Polymers.