Affiliation:
1. Geotechnical Research Center, Department of Civil and Environmental Engineering, University of Western Ontario Canada
Abstract
The unsaturated hydraulic conductivity function, k, is often predicted from the soil–water characteristic curve (SWCC). Most methods implicitly or explicitly derive a pore-size distribution (PSD) from the SWCC, which is then used to calculate k at any suction. Two important factors ignored by most methods are the change in the PSD during the SWCC test, and the influence of pore geometry on the SWCC. In this paper the SWCCs and evolution of the PSDs of four fine-grained compacted soils are measured. The SWCCs are measured from 0 to 3000 kPa by the axis-translation technique, and the PSDs are obtained by mercury intrusion porosimetry. A method is developed to predict the SWCCs from the measured PSD distribution data. Processes modelled include the effect of pore geometry on shrinkage during the SWCC tests, the isolation of water by the invading non-wetting phase (air), and differences in the relative accessibility of pores from the surface of the mercury intrusion and SWCC test samples. Different methods to model the above phenomena are developed and compared. The best predictions of gravimetric water content lie between one and two standard deviations of the measured SWCC data.
Subject
Earth and Planetary Sciences (miscellaneous),Geotechnical Engineering and Engineering Geology
Cited by
130 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献