A geotechnical description of fresh cement grout—filtration and consolidation behaviour

Abstract

The removal of water from three Portland cement grouts by pressure filtration is examined, and the consolidation behaviour of the filtered material clarified. The filtration takes place by the laying down of a very stiffs filter cake through the removal of excess water. The behaviour due to further loading resembles that of a reconstituted silt. For stress levels above the filtration pressure the calculated permeability values are similar to those from the filtration phase only if the data sampling rate is sufficiently rapid to discriminate the first portion of the observed primary consolidation curve. The change in void ratio for incremental loading is roughly linear with the change in the logarithm of the vertical effective stress. The characterization of fresh cement paste using standard soil mechanics models is both appropriate and useful, at least during the first few hours after mixing.