Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides-Reference-Cited by-同舟云学术

Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides

Published:2011-12-16 Issue:21 Volume:46 Page:2659-2673
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Gaitonde VN¹,Karnik SR²,Rubio J Campos³,Abrão AM³,Correia A Esteves⁴,Davim J Paulo⁵

Affiliation:

1. Department of Industrial and Production Engineering, B. V. B. College of Engineering and Technology, Karnataka, India

2. Department of Electrical and Electronics Engineering, B. V. B. College of Engineering and Technology, Karnataka, India

3. Department of Mechanical Engineering, Universidade Federal de Minas Gerais, Belo Horizonte MG, Brazil

4. Department of Mechanical Engineering and Industrial Management, School of Technology, Polytechnic Institute of Viseu, Viseu, Portugal

5. Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal

Abstract

In this work, surface roughness study in high-speed drilling of unreinforced polyamide (PA6) and reinforced polyamide with 30% of glass fibers (PA66 GF30) using cemented carbide (K20) tool has been carried out. The experiments were planned as per full factorial design of experiments. The effects of cutting speed and feed rate on centerline average surface roughness, maximum peak to valley height, and peak counts have been analyzed by developing response surface methodology based third-order mathematical models. The parametric analysis clearly indicates the influence of reinforced fiber on surface finish when high-speed cutting in drilling is used.

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0021998311431640

Reference26 articles.

1. Study on Some Aspects of Machinability in Unreinforced and Reinforced Polyamides

2. A comparative evaluation of the turning of reinforced and unreinforced polyamide

3. Taguchi Approach for Achieving Better Machinability in Unreinforced and Reinforced Polyamides

4. Modeling and Analysis of Machinability Characteristics in PA6 and PA66 GF30 Polyamides through Artificial Neural Network

Cited by 36 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Drilling of GFRP with Liquid Silicon Rubber Reinforced with fine Aluminium Powder on Hole Surface Quality and Tool Wear using DOE;Journal of Bio- and Tribo-Corrosion;2023-06-20

2. INVESTIGATION OF DRILLING PERFORMANCE OF REINFORCED POLYAMIDE 6 POLYMER COMPOSITE;Konya Journal of Engineering Sciences;2023-03-01

3. Experimental investigations on drilling of hybrid composites using different drill bit geometries;Materials Today: Proceedings;2023

4. Surface Roughness Assessment After Milling of Pure and Carbon Black Reinforced Polypropylene Materials;Lecture Notes in Mechanical Engineering;2023

5. Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study;The International Journal of Advanced Manufacturing Technology;2022-12-13