Influence of Annealing on the Performance of Short Glass Fiber-reinforced Polyphenylene Sulfide (PPS) Composites-Reference-Cited by-同舟云学术

Influence of Annealing on the Performance of Short Glass Fiber-reinforced Polyphenylene Sulfide (PPS) Composites

Published:2005-01 Issue:1 Volume:39 Page:21-33
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Arici Armağan¹,Sinmazçelik Tamer,Çapan Levon¹,Yilgör Iskender,Yilgör Emel²

Affiliation:

1. Department of Mechanical Engineering, Kocaeli University, 41040, Izmit, Kocaeli, Turkey

2. Department of Chemistry, Koc University, 34450, Sariyer, Istanbul, Turkey

Abstract

The influence of annealing on the morphology and the performance of randomly oriented short glass fiber-reinforced polyphenylene sulfide (PPS) composites have been investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMTA), impact tests, and scanning electron microscopy (SEM). Endotherms belonging to secondary crystals are seen 10–20 C above the annealing temperatures. DMTA results showed that the annealed samples had higher glass transition temperatures and elastic moduli values when compared with the quenched samples. The effect of microstructure on elastic deformation, crack formation, and crack propagation are studied with instrumented impact tester.

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0021998305046432

Reference15 articles.

1. McCrum, N.G. , Buckley, C.P. and Bucknall, C.B. (1997). Principles of Polymer Engineering, pp. 369–425, Oxford Science Publications, New York .

2. Annealing effects in poly(phenylene sulfide) as observed by dynamic mechanical analysis

3. On the determination of polymer crystallinity for a thermoplastic PPS composite by thermal analysis

4. The influence of thermal history on the mechanical properties of poly(ether ether ketone) matrix composite materials

Cited by 20 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Investigating the tensile properties and crystallinity of 3D-printed poly (ether ether ketone)/poly (ether imide) [PEEK/PEI] blend in the Z-direction by fused filament fabrication;Progress in Additive Manufacturing;2024-08-29

2. Thermal properties and hydrophilicity of antibacterial poly(phenylene sulfide) nanocomposites reinforced with zinc oxide-doped multiwall carbon nanotubes;Journal of Polymer Research;2022-02-16

3. Thermo-mechanical characterization of discontinuous recycled/repurposed carbon fiber reinforced thermoplastic organosheet composites;Journal of Composite Materials;2021-05-12

4. Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology;Journal of Applied Polymer Science;2020-07-17

5. Mechanical behavior of sintered submicron glass fiber mats;International Journal of Mechanical Sciences;2020-03