Friction stir welding of aluminum alloy with varying tool geometry and process parameters-Reference-Cited by-同舟云学术

Friction stir welding of aluminum alloy with varying tool geometry and process parameters

Published:2011-12-13 Issue:4 Volume:226 Page:641-648
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Biswas P¹,A Kumar D¹,Mandal N R²

Affiliation:

1. Department of Mechanical Engineering, Indian Institute of Technology Guwahati, India

2. Department of Ocean Engineering and Naval Architecture, Indian Institute of Technology, Kharagpur, West Bengal, India

Abstract

The present investigation had two objectives: first, to study the effect of the geometry of the tool pin, and second, the effect of tool rotation and welding speeds on the mechanical properties of friction stir welded joints made for samples of commercial grade aluminium alloys. The results obtained from the performed experiments showed that tools with tapered pins created superior mechanical properties for the friction stir welded joints. It was also found that overall mechanical response depended on the ratio of the tool rotation speed to the tool traverse speed. Suitable values for this ratio were isolated that lead to high quality mechanical properties for the created joints.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1177/0954405411424111

Reference21 articles.

1. Microstructural investigation of friction stir welded 7050-T651 aluminium

2. Friction stir welding and processing

3. Sinke J., Stofregen M. M., Estraatsma E. Tailor made blanks for the aircraft industry: a pilot study, technical report, Netherlands Institute for Metals Research (NIMR), Netherlands, 2005.

4. Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075–T6 aluminium alloy

Cited by 46 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Tensile strength prediction and process parameters optimization of FSW thick AA2219-T8 based on ANN-GA;Journal of the Brazilian Society of Mechanical Sciences and Engineering;2024-05-25

2. Intelligent Prediction of FSW Physical Quantity and Joint Mechanical Properties;Welding Journal;2024-01-01

3. Study on the interfacial microstructure evolution of aluminum and CFRTP on FSLW joints: influence of pin length;Journal of Adhesion Science and Technology;2023-12-08

4. Optimization of process parameters in friction stir welding of 2219 aluminum alloy thick plate;The International Journal of Advanced Manufacturing Technology;2023-11-04

5. Friction Stir Welding Tool Life Assessment Through Fatigue Analysis;Strojnícky časopis - Journal of Mechanical Engineering;2023-11-01