Investigation on the effect of coating properties on lubrication of a coated spur gear pair

Abstract

A thermal elastohydrodynamic lubrication model is proposed for a coated gear pair in which the influence coefficients for the elastic deformation and the subsurface stress components are obtained through the frequency response functions. The generalized Reynolds equation is utilized to represent the non-Newtonian effect. Energy equations of the contacting solids and the oil film are derived and solved based upon the marching method. The discrete convolute, fast Fourier transform method is used for fast calculation of the tooth surface displacement and the stress components underneath the surface. Variations of the slide-to-roll ratio, rolling speed, and the tooth load during gear meshing are considered and the film squeeze effect is taken into account. Effects of the coating thickness on the tribological performance, i.e. the film thickness, the pressure, the frictional behavior as well as the stress components are investigated under both the smooth and rough surface assumptions. Effects of the root mean square value of the tooth surface roughness on the pressure and stresses are discussed.