Experimental investigation and performance enhancements characteristics of gaseous assisted powder mixed near dry electric discharge machining

Abstract

Gaseous assisted powder mixed near dry EDM (GAPMND-EDM) is one of the recent hybrid technologies, which not only enhance the machining performance, but at the same time, high quality products with better surface quality characteristics can also be achieved. In this study, the response parameters were material removal rate, surface finish, micro hardness and residual stress. It was found that the maximum material removal rate (MRR 3.379 mg/min) was achieved with combination of (dielectric) oxygen gas with graphite powder while lowest surface roughness (SR 1.11 μm) was found to be with dielectric argon gas with graphite additives. Highest micro hardness (MH) and lowest residual stress (RS) was 820.30 Vickers hardness number (VHN) and 229 MPa found with dielectric combination of zinc additives with argon gas.