Dynamic analysis of a planar multibody system with multiple revolute clearance joints

Abstract

This paper focuses on the dynamic responses of a planar mechanism with multiple clearance joints. The effect of the impact between the journal and the bearing in the clearance joint is described using an improved impact force model, and a typical four-bar linkage mechanism with multiple clearance joints is presented as an example. Two conditions are considered in this research, one is the single clearance joint with different position, and the other is multiple clearance joints. From a large number of numerical results, some important conclusions are obtained as follows: (1) with the influence of the clearance joint, the dynamic output of system has obvious vibration in comparison to the ideal value. (2) The position of the clearance joint has a clear effect on the response of system; the larger the distance of the clearance joint from the drive motor, the smaller its influence on the output of the system. (3) With the increase in the clearance joint number, the dynamic stability of the multibody system is decreased gradually, and the dynamic characteristic of the system also appears as obvious nonlinear phenomenon. (4) The coupling phenomenon appears when multiple clearance joints in the multibody system are considered, which should be examined seriously during the process of design and numerical analysis.