Estimation of acoustic transmission loss for carbon honey comb panel with melamine foam-Reference-Cited by-同舟云学术

Estimation of acoustic transmission loss for carbon honey comb panel with melamine foam

Published:2022-11-14 Issue:11 Volume:53 Page:520-531
ISSN:0957-4565
Container-title:Noise & Vibration Worldwide
language:en
Short-container-title:Noise & Vibration Worldwide

Author:

Zai Behzad A¹^ORCID,Sami Saad¹,Waseem Muhammad¹,Rehman Tanzeel Ur¹

Affiliation:

1. Space and Upper Atmosphere Research Commission, Karachi, Pakistan

Abstract

In this paper, the acoustic noise reduction of aluminum honeycomb/carbon face sheet sandwich panel with Melamine Foam (MF) lining of variable thicknesses (25 mm & 50 mm) is numerically estimated and then experimentally verified using impedance tube based on transfer matrix method. The presence of carbon face sheets and MF lining can have a significant impact on the Transmission Loss (TL). The impedance tube can measure the TL for frequency range of 64 Hz–6.2 kHz. A conventional, two-microphone impedance tube, is connected to a sample holder downstream of the first microphone pair and a section downstream of the sample holder that accommodates a second pair of microphones. The Finite Element Analysis and experimental results are compared and found in good agreements. The TL levels for each layer of material is estimated prior to have TL for combined structure. Furthermore, the optimized insulation foam thickness of 50 mm is obtained based on required acoustic parameters.

Publisher

SAGE Publications

Subject

Mechanical Engineering,Acoustics and Ultrasonics,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

http://journals.sagepub.com/doi/pdf/10.1177/09574565221139582

Reference44 articles.

1. Vibroacoustic Modeling Study of the Delta II 10-Foot Composite Fairing

2. Defosse H, Hamdi MA. Vibro-acoustic study of Ariane V launcher during lift-off. In: The 29th International Exhibition on Noise Control Engineering, Nice, France, 27–30 August 2000.

3. Integrated Aero–Vibroacoustics: The Design Verification Process of Vega-C Launcher

4. Scott JM, Jay BG, Robert CB. General environmental specification for STS and ELV – Payloads, subsystems and components. Greenbelt, MD: GEVS-SE.” Rev. June, NASA Goddard Space Flight Center, 1996, p. 20771.