Author:
Popov Anton V.,Pleshivtseva Yulia E.
Abstract
The aim of the paper is to develop program complex in software MATLAB with integrated numerical 2D nonlinear FLUX model, which is used for solving optimal inductor design and control problems for heating stage of surface induction hardening. Considered program complex is based on alternance method, that allows to write systems of transcendental equations, closed with respect to all unknown design and control parameters of the process. The suggestion for implementation of obtained optimal control algorithm is presented.
Publisher
Samara State Technical University
Reference18 articles.
1. Rapoport E.Ya. Optimalnoe upravleniye sistemami s raspredelennimi parameterami [Optimal control of systems with distributed parameters]. Moscow: Visshaya shkola, 2009. 678 p.
2. Rudnev V.I. et al. Handbook of Induction Heating. New York, Basel: Marcel Dekker Inc., 2003. 797 p.
3. Blanter M.E. Metallovedenie i ternicheskaya obrabotka [Metal science and heat treatment]. Moscow: Mashgiz, 1963. 416 р.
4. Lakhtin Yu.M. Mettalovedenie i termicheskaya obrabotka metallov [Metal science and heat treatment of metals]. Moscow: Metallurgiya, 1983. 360 р.
5. Pleshivtseva Yu.E., Popov A.V., Popova M.A., Derevyanov M.Yu. Optimalnoye proektirovaniye induktora dlya poverkhnostnoi zakalki tsilindricheskikh zagotovok na osnove chislennoi dvumernoi modeli [Optimal inductor design for surface hardening of cylindrical billets] // Bulletin of Astrakhan State Technical Unversity. Series “Control, computer engineering, informatics”. Astrakhan, 2019. No. 1. Рр. 40–50.