Measurement of the Complex Motion of Tapping Machine Spindle Based on Mechanical Profile Modulation-Reference-Cited by-同舟云学术

Measurement of the Complex Motion of Tapping Machine Spindle Based on Mechanical Profile Modulation

Published:2023 Issue: Volume:72 Page:1-9
ISSN:0018-9456
Container-title:IEEE Transactions on Instrumentation and Measurement
language:
Short-container-title:IEEE Trans. Instrum. Meas.

Author:

Jiang Kuosheng¹^ORCID,Yue Lei²^ORCID,Li Zhixiong³^ORCID

Affiliation:

1. State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines, School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, China

2. School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, China

3. Faculty of Mechanical Engineering, Opole University of Technology, Opole, Poland

Funder

Open Project of State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines

National Key Research

Key Project of National Natural Science Foundation of China

Publisher

Institute of Electrical and Electronics Engineers (IEEE)

Subject

Electrical and Electronic Engineering,Instrumentation

Link

http://xplorestaging.ieee.org/ielx7/19/10012124/10297556.pdf?arnumber=10297556

Reference28 articles.

1. A quasi-zero-stiffness vibration isolator using a cam mechanism with user-defined profile

2. Analysis and synthesis of the displacement function of the follower in constant-breadth cam mechanisms

3. A Smart Operator Assistance System Using Deep Learning for Angle Measurement

4. A Dual-Interferometer-Based Angular Measurement System With Absolute Angle Recovery Method

5. Pre-compensation of contour errors for five-axis machine tools through constructing a model reference adaptive control