EFFECT OF SUBSTRATE TEMPERATURE ON THE GROWTH OF COPPER OXIDE THIN FILMS DEPOSITED BY PULSED LASER DEPOSITION TECHNIQUE

Abstract

The effect of substrate temperature on growth of pulsed laser deposited copper oxide thin films has been investigated by employing Nd: YAG laser (532[Formula: see text]nm, 6[Formula: see text]ns, 10[Formula: see text]Hz) irradiation at a fluence of 8.2[Formula: see text]J/cm2. XRD analysis reveals that copper oxide films deposited at room temperature are amorphous in nature, whereas films deposited at higher substrate temperatures are polycrystalline in nature. SEM and AFM analyses revealed that films deposited at substrate temperatures, ranging from room temperature to 300[Formula: see text]C are comprised of large sized clusters, islands and particulates, whereas uniform films with an appearance of granular morphology and distinct bump formation are grown at higher substrate temperatures of 400[Formula: see text]C and 500[Formula: see text]C. The optical bandgap of deposited films is evaluated by UV-VIS spectroscopy and shows a decreasing trend with increasing substrate temperature. Four point probe analysis reveals that electrical conductivity of the deposited films increases with increase in the substrate temperature, and is maximum for highest growth temperature of 500[Formula: see text]C. It is revealed that growth temperature plays a significant role for structure, texture, optical and electrical behavior of copper oxide thin films. The surface and structural properties of the deposited films are well correlated with their electrical and optical response.