Affiliation:
1. School of Population and Public Health, Faculty of Medicine, University of British Columbia , Vancouver, British Columbia V6T 1Z3 , Canada
2. BC Construction Safety Alliance , New Westminster, British Columbia V3M 5Y4 , Canada
3. Department of Environmental and Occupational Health, Université de Montréal, School of Public Health , Montréal, Quebec H3N 1X9 , Canada
Abstract
Abstract
Task-based respirable crystalline silica (RCS) exposure monitoring data was collected from construction work sites across 3 Canadian provinces: Alberta, British Columbia (BC), and Manitoba. In total 373 RCS samples were obtained from 70 worksites across 44 companies. Sampling was conducted between May 2015 and August 2020. The overall geometric mean (GM) RCS exposure was 0.045 mg/m3 (geometric standard deviation, GSD = 6.8). Alberta had the highest average exposure and the highest variability with GM of 0.060 mg/m3 (GSD = 9.3), the GM in BC was 0.044 (GSD = 4.3), and in Manitoba the GM was 0.033 (GSD = 7.0). A multivariable model was built using forward stepwise linear regression modeling. Province, task type, work environment (indoor vs. outdoor), construction material, sampling duration, and engineering control use were all statistically significant predictors of exposure level in partial F-tests (P < 0.05). Overall, the model explained 42% of the RCS concentration variability. Task type contributed most to the model’s explanatory power. The task type with highest average exposure levels was demolition (GM 0.30 mg/m3, GSD 0.49). Breaking (GM 0.16 mg/m3, GSD 8.4) and grinding (GM 0.081 m/m3, GSD 7.4) also had high-exposure levels. Working outdoors was associated with exposure levels 39% lower than indoors. Exposure control measures such as local exhaust ventilation and wetting were also associated with lower exposure levels. Among construction materials, Cement, sand, and stone were associated with higher RCS exposure levels relative to the reference material, concrete. The results of this study indicate that workers in western Canada remain exposed to RCS at levels that exceed the health-based American Congress for Governmental Industrial Hygienists Threshold Limit Value of 0.025 mg/m3. Although there were some differences in exposure levels between the provinces, the determinants of exposure were similar in all 3. The overall GM RCS exposure was 0.045 mg/m3 (geometric standard deviation, GSD = 6.8). Alberta had the highest average exposure and the highest variability with GM of 0.060 mg/m3 (GSD = 9.3), the GM in BC was 0.044 (GSD = 4.3), and in Manitoba the GM was 0.033 (GSD = 7.0).
Funder
BC Construction Safety Alliance
Alberta Labour
Workers Compensation Board of Manitoba
Publisher
Oxford University Press (OUP)
Subject
Public Health, Environmental and Occupational Health
Reference33 articles.
1. Respirable crystalline silica dust exposure during concrete finishing (grinding) using hand-held grinders in the construction industry;Akbar-Khanzadeh;Ann Occup Hyg,2002
2. Morbidity and mortality weekly report silicosis mortality trends and new exposures to respirable crystalline silica—United States, 2001–2020;Bang;Morbid Mortal Wkly Rep,2015
3. Occupational exposure to silica in construction workers: a literature-based exposure database;Beaudry;J Occup Environ Hyg,2013
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献