Author:
Deng Zhikun,Zou Xionghui,Lu Pengyu,Geng Peilin,Wang Lihui,Zhao Haiguang
Abstract
During the development of a model equipped with dual VVT engines, a higher temperature of the catalyst was discovered. Therefore, the sweep point of VVT is optimized under low speed and high load conditions. The test results show that VVT has a significant effect on the temperature of the catalytic converter, and the temperature of the catalytic converter has decreased after optimization. At the same time, the VVT opening has little effect on the dynamics. In addition, VVT has an effect on the knocking tendency of the engine. When the knocking tendency increases, the temperature of catalytic converter and power performance of the engine are deteriorated. On the contrary, if the ignition angle can be advanced, the performance of the engine can be optimized.
Reference5 articles.
1. GB18352.6—2016, Limits and measurement methods for emissions from light-duty vehicles (CHINA 6) [S]. China: Ministry of Ecology and Environment of the People’s Republic of China & General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, 2016.
2. Evaluation of Different Turbocharger Configurations for a Heavy-Duty Partially Premixed Combustion Engine
3. Zhikun Deng. Simulation to Performance and Structure Optimization of Gasoline Particulate Filter [D]. Hebei University of Technology, 2016.
4. Qian Liyun et al. Influence and strategy optimization of fuel injection timing on PN and fuel consumption[J]. E3S Web Conf. 268 01053 (2021)
5. Investigations on Pre-Ignition in Highly Supercharged SI Engines