Al Implantation in Sic; Where Will the Ions Come to Rest?

Abstract

In all implantations into crystalline targets, quite a few ions find a path along a crystal channel or plane, so called channeling, and these ions travel deep into the crystal. This paper treats aluminum (Al) implantation in 4H-SiC and show how the crystal lattice will guide incoming ions deep into the target and modify the final dopant distribution. 4H-SiC samples have been implanted with 100 keV Al-ions, in a “random” direction using the wafer miscut angle of 4°, as well as with the impact beam aligned anti-parallel to the [0001] direction. Aluminium concentration versus depth profiles has been recorded by secondary ion mass spectrometry (SIMS). To track the most probable ion paths during stopping process, SIIMPL, a Monte Carlo simulation code based on the binary collision approximation (MC-BCA) has been used. In addition, the remaining ion energy has been extracted from SIIMPL at various depth along the ion path. Our results show that, independent of the used impact angle, some ions will be steered by crystal planes predominantly into the direction and also along the six directions. The energy loss is smaller along these low index axes. Therefore, at a depth of 1.2 μm, some Al ions along a path may still have kinetic energy, more than 40% of the original 100 keV, and continues to move deep into the SiC sample. The mean projected range of 100 keV ions in 4H-SiC is about 120 nm.