Tool Wear of Cubic Boron Nitride in Intermittent Cutting of Hardened Steel ASTM D2 with High-Pressure Coolant Supply-Reference-Cited by-同舟云学术

Tool Wear of Cubic Boron Nitride in Intermittent Cutting of Hardened Steel ASTM D2 with High-Pressure Coolant Supply

Published:2022-06-22 Issue: Volume:907 Page:19-25
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Wada Tadahiro¹

Affiliation:

1. Osaka Sangyo University

Abstract

To clarify the effect of using high-pressure coolant supply in combination with the intermittent cutting of hardened steel ASTM D2, intermittent cutting of hardened steel was performed with various sintered cubic boron nitride compact (cBN) tools. The result revealed that it was effective to use a high-pressure coolant supply method in combination for intermittent cutting of hardened steel. An effective tool material had a bonding phase of WC-Co-Al and a high content of cBN particles. Furthermore, the more suitable cutting edge shape was "a negative-land width of 0.13mm, a negative-land angle of 45°, and R honing of 0.04 mm".

Publisher

Trans Tech Publications, Ltd.

Subject

Anesthesiology and Pain Medicine

Link

https://www.scientific.net/AMM.907.19.pdf

Reference13 articles.

1. Ge´rard Poulachon, B.P. Bandyopadhyay, I.S. Jawahir, Se´bastien Pheulpin, Emmanuel Seguin, The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting tools, International Journal of Machine Tools & Manufacture, 43, 2003, pp.139-144.

2. Gérard Poulachon, B.P. Bandyopadhyay, I.S. Jawahir, Sébastien Pheulpin, Emmanuel Seguin, Wear behavior of CBN tools while turning various hardened steels, Wear, 256, 2004, pp.302-310.

3. G.K. Dosbaeva, M.A. El Hakim, M.A. Shalaby, J.E. Krzanowski, S.C. Veldhuis, Cutting temperature effect on PCBN and CVD coated carbide tools in hard turning of D2 tool steel, Int. Journal of Refractory Metals and Hard Materials, 50, 2015, pp.1-8.

4. J.A. Arsecularatne, L.C. Zhang, C. Montross, P. Mathew, On machining of hardened AISI D2 steel with PCBN tools, Journal of Materials Processing Technology, 171, 2006, pp.244-252.

5. J. Guddat, R. M'Saoubi, P. Alm, D. Meyer, Hard turning of AISI 52100 using PCBN wiper geometry inserts and the resulting surface integrity, Procedia Engineering (1st CIRP Conference on Surface Integrity (CSI)), 19, 2011, pp.118-124.