Affiliation:
1. Peter the Great Saint-Petersburg Polytechnic University
2. Peter the Great St. Petersburg Polytechnic University (SPbPU)
3. Peter the Great St. Petersburg Polytechnic University
Abstract
Fluoroaluminate glasses of the composition 2Ва (РО3)2–98MgCaSrBaYAl2F14-xErF3, where x=0, 0.1, 0.5, 1.0 mol. % have been prepared by melt quenching technique and characterized by optical absorption, emission spectra and decay curve analysis. Measured transmission spectra indicate the high practical relevance of the composition of glasses under investigation for photonics and optoelectronics products. In the region of 500–700 nm, luminescence spectra with peaks at about 522, 550, and 665 nm were obtained. The positions of the luminescence bands have been described using an erbium ion energy scheme. The concentration dependences of the absolute quantum yield values for the series of Er3+-doped fluoroaluminate glasses were also established. The maximum value of absolute quantum yield was found for a sample with Er3+ concentration 0.21∙1020 сm-3. The main reason for reducing the values of absolute quantum yield is concentration quenching.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference29 articles.
1. Ejima, A., et al. Criteria for uniform distribution of rare earth sulfides in large ingots of high-strength sheet steel during crystallization., Deoxidation and formation processes of non-metallic inclusions in steels. (1977).
2. Burmasov, S. P., et al. Effect of Technology for Modification with Calcium and Ree on Pipe Steel Nonmetallic Inclusion Morphology and Production Properties., Metallurgist 59.11-12 (2016): 1068-1074.
3. Rudskoy, A. I., V. N. Tsemenko, and S. V. Ganin. A Study of Compaction and Deformation of a Powder Composite Material of the 'Aluminum–Rare Earth Elements' System., Metal Science and Heat Treatment 56.9-10 (2015): 542-547.
4. Smirnov LA, Rovnushkin VA, Oryshchenko AS, Kalinin GY, Milyuts VG. Modificationof steel and alloys with rare-earth elements. Part 2 Metallurgist. 2016 May 1;60(1-2):38-46.
5. Velichko, O. V., et al. Friction stir welding of thick plates of Al–Mg–Sc alloy., Welding international 30.8 (2016): 630-634.