The Structure and Corrosion Resistance of the Coatings Obtained by Non-Vacuum Electron Beam Cladding of the Ti-Nb Powder Mixture on a Titanium Substrates-Reference-Cited by-同舟云学术

The Structure and Corrosion Resistance of the Coatings Obtained by Non-Vacuum Electron Beam Cladding of the Ti-Nb Powder Mixture on a Titanium Substrates

Published:2015-08 Issue: Volume:788 Page:267-273
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Polyakov Igor A.¹,Samoylenko Vitaliy V.¹,Lenivtseva Olga G.¹^ORCID,Golkovski Mikhail G.²

Affiliation:

1. Novosibirsk State Technical University

2. Budker Institute of Nuclear Physics

Abstract

In this study Ti-Nb coatings formed on the surfaces of cp-titanium plates by electron beam cladding were investigated. It was found that the coatings were characterized by a dendrite structure and a quenched structure was observed in the interdendritic space. The energy dispersive X-ray analysis revealed some differences between the elemental composition of different areas corresponding to dendritic crystals and the space between them. The corrosion resistance of the Ti-Nb alloy obtained on the titanium surface in the concentrated nitric acid was almost 8 times higher than the cp-titanium corrosion resistance.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.788.267.pdf

Reference22 articles.

1. G. Lütjering, J. C. Williams, Titanium (Engineering Materials and Processes), second ed., Springer, (2007).

2. C. Leyens, M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-vch, (2003).

3. J. Matthew, Jr. Donachie, Titanium: A Technical Guide, second ed., ASM International, (2000).

4. W. Sha, S Malinov, Titanium alloys: modelling of structure, properties and applications, Woodhead Publishing Limited, (2009).

5. B. Raj, U. K. Mudali, Materials development and corrosion problems in nuclear fuel reprocessing plants, Progress in Nuclear Energy. 48 (2006) 283-313.

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Composite material of the Ti-Ta-Zr system intended to work in boiling sulfuric and hydrochloric acids;8th International Congress on Energy Fluxes and Radiation Effects;2022-11-14

2. Development of a composite corrosion-resistant material based on titanium for chemical industry vessels;Journal of Physics: Conference Series;2018-11

3. Structure and mechanical properties of a two-layered material produced by the E-beam surfacing of Ta and Nb on the titanium base after multiple rolling;Applied Surface Science;2018-04

4. The technology of forming Ti-Nb layers on the surface of titanium alloy plates using a high-voltage electron beam output into a protective argon medium;IOP Conference Series: Materials Science and Engineering;2017-12

5. Welding of a corrosion-resistant composite material based on VT14 titanium alloy obtained using an electron beam emitted into the atmosphere;IOP Conference Series: Materials Science and Engineering;2017-01