Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method-Reference-Cited by-同舟云学术

Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method

Published:2011-11 Issue: Volume:383-390 Page:7117-7121
ISSN:1662-8985
Container-title:Advanced Materials Research
language:
Short-container-title:AMR

Author:

Abdullah A.B.¹,Sapuan S.M.²,Samad Z.²,Khaleed H. M. T.³,Aziz N.A.²

Affiliation:

1. Universiti Sains Malaysia

2. Universiti Putra Malaysia

3. School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus

Abstract

Accuracy is the key issue in the precision forging. Geometric and dimension errors are the two significant defects found in most of near net or net shape manufacturing process. It becomes more critical for complex part such as an AUV propeller blade. In this study, geometric error was quantified by comparing the blade profile obtained from nominal geometry of the blade and the profile constructed by commercial optical method namely Alicona system.

Publisher

Trans Tech Publications, Ltd.

Subject

General Engineering

Link

https://www.scientific.net/AMR.383-390.7117.pdf

Reference8 articles.

1. Lange, K. Handbook of Metal Forming. McGraw-Hill, New York, (1985).

2. Kuzman, K., J of Mat Process Tech, 113 (2001), p.10.

3. Long, H. J of Mat Process Tech. 177(2006), p.591.

4. Hernández, J. J., Franco, P., Estrems, M. and Faura, F., J of Mat Process Tech. 180(1-3) (2006), p.143.

5. Suh, S. H., Lee, E. S., Kim, H. C. and Cho, J. H., Int J of Mach Tools and Manuf, 42(3) (2002), p.335.

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A High-Precision Form-Free Metrological Method of Aeroengine Blades;International Journal of Precision Engineering and Manufacturing;2019-10-28

2. The Use of Focus-Variation Microscopy for the Assessment of Active Surfaces of a New Generation of Coated Abrasive Tools;Measurement Science Review;2016-04-01

3. A review of quantification of lithic use-wear using laser profilometry: a method based on metrology and fractal analysis;Journal of Archaeological Science;2014-08

4. Profile Measurement Based on Focus Variation Method for Geometrical Defect Evaluation: A Case Study of Cold Forged Propeller Blade;Advances in Mechanical Engineering;2014-01-01

5. Geometrical Defect Evaluation of Cold Embossing AA6061 Based on FEA and Physical Modeling Technique;Applied Mechanics and Materials;2013-04