Affiliation:
1. Second University of Naples
2. University of Naples "Federico II"
3. Advanced Transports s.r.l.
Abstract
In the present paper, results of experimental tests carried out on hybrid (bonded/bolted) and adhesive composite single-lap joints are showed. The laminate adherends were made by unidirectional carbon fiber/epoxy with symmetric stacking sequence. In particular, the tests were carried out to evaluate strength and failure mode of the different joints. These joints were subjected to quasi-static tensile displacement and tests were conducted using a universal testing machine. The maximum tension load that the specimen can bear is determined and the failure process is correlated to the lay-up of the composite and joint type.
Publisher
Trans Tech Publications, Ltd.
Reference7 articles.
1. Gang Li, Ji Hua Chen, M. Yanishevsky, N. C. Bellinger, Static strength of a composite butt joint configuration with different attachments, Composite Structures 94 (2012) 1736-1744.
2. T. Sadowski, P. Golewski, E. Zarzeka-Raczkowska, Damage and failure processes of hybrid joints: Adhesive bonded aluminium plates reinforced by rivets, Computational Materials Science 50 (2011) 1256-1262.
3. F Caputo, G Lamanna, A Soprano, Numerical Modeling and Simulation of a Bolted Hybrid Joint, Structural Durability & Health Monitoring 7 (2011) 283-296.
4. F Caputo, G Lamanna, A Soprano, Residual Strength Improvement of an Aluminium Alloy Cracked Panel, The Open Mechanical Engineering Journal 7 (2013) 90-97.
5. F Caputo, G Lamanna, A Soprano, Effects of Tolerances on the Structural Behavior of a Bolted Hybrid Joint, Key Engineering Materials 488-489 (2012) 565-569.
Cited by
24 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献