Affiliation:
1. East China University of Science and Technology
2. Baosteel and NSC Automotive Steel Sheets Co., Ltd.
Abstract
A failure case of the outside coating on the furnace roller is presented in this study. The coating consists of WC-Co, which is deposited on 45 steel by High Velocity Oxygen Fuel (HVOF) spraying. The spalling of coatings has been found in the middle of the roller. Rust was also observed on the coatings of the roller. The failure analysis of the coating was performed in terms of composition analysis, and microstructure observation etc. In addition, the effects of different sandblasting post-treatments were compared. And the effect of substrate material is investigated on the corrosion of coatings. It was concluded that the sandblasting particles remained on the substrate surface have effects on the failure of the coating. The peeling-off coating on the roller is also related with the formation of iron oxides. Less sand can be remained on the substrate surface when air purging and brushing is used after the sand-blasting compared with air purging or non-treatment is applied. The stainless steel shows more excellent corrosion resistance than the low carbon steel when they are used as substrate for WC-Co coatings.
Publisher
Trans Tech Publications, Ltd.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献