Prediction of a New Form of the Cutting Tool According to Achieve the Desired Surface Quality-Reference-Cited by-同舟云学术

Prediction of a New Form of the Cutting Tool According to Achieve the Desired Surface Quality

Published:2012-12 Issue: Volume:268-270 Page:473-476
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Jurko Jozef¹,Panda Anton¹,Behún Marcel¹

Affiliation:

1. Technical University in Košice

Abstract

This article presents the results of experiments that concerned on the surface roughness quality by drilling of a new Extra Low Carbon (ELC) austenitic stainless steel X01Cr14Ni9TiN. This article presents conclusions of machinability tests on new austenitic stainless steels X01Cr14Ni9TiN. The results of cutting zone evaluation under cutting conditions (cutting speed in interval vc=40-60 m/min, depth of cut ap=2.5 mm and feed f=0.01-0.12 mm per rev.).

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.268-270.473.pdf

Reference10 articles.

1. L. Belluco-L. De Chiffre, Evaluation of vegetable-based oils in drilling austenitic stainless steels. Journal of Materials Processing Technology 148, pp.171-176, (2004).

2. J. Jurko-A. Panda-M. Gajdoš, Study of changes under the machined surface and accompanying phenomena in the cutting zone during drilling of stainless steels with low carbon content. Metalurgia journal, Vol. 50, 2, pp.113-117, ISSN 0543-5846, (2011).

3. J. Jurko-A. Panda-M. Gajdoš, Accompanying phenomena in the cutting zone machinability during turning of stainless steels. International Journal Machining and Machinability of Materials, INDERSCENCE Publisher, Vol. 5, No. 4, 2009, 383-400 p. ISSN 1748-5711, (2009).

4. J. Jurko-A. Panda: Study on screw drill wear when drilling a new stainless steel X02Cr18Ni10MoTiN and accompanying phenomena in the cutting zone. Advanced Materials Research, Vol. 314-316, 995-998 p., ISSN 1022-6680, (2011).

5. I. Mrkvica, Application of Coated Cemented Carbides at Hardened Gear Cutting. Proceedings of MATAR Praha, pp.213-216 (2004).

Cited by 31 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. DECISION-MAKING SUPPORT TECHNOLOGIES USING THE CAD/CAM/CAE SYSTEM DESIGN AND MANUFACTURE OF BONE SUBSTITUTES WITH FUNCTIONAL PROPERTIES;MM Science Journal;2023-12-13

2. VIBRATION PREDICTION BASED ON PRESENTING IT PREPARATION PERIOD AS A BLUE-UP PROCESS;MM Science Journal;2023-12-13

3. Application of Methods of Decentralized Systems in Management in Lean Manufacturing;Management Systems in Production Engineering;2023-12-01

4. Calculation of the Operational Characteristics of the Impulse Gas-Barrier Face Seal;Management Systems in Production Engineering;2023-12-01

5. ASSESSMENT OF SAFETY RISKS USING QUALIMETRIC METHODS;MM Science Journal;2023-10-04