Affiliation:
1. Universiti Tun Hussein Onn Malaysia
Abstract
In this work, the electrode wear rate (EWR) and electrode surface characteristic of copper electrode when EDM of Nickel Based Super Alloy, Inconel 718 at higher peak current and pulse duration were analyzed. Experiments were conducted using Inconel 718 as a work piece and copper as an electrode with a kerosene dielectric under different peak currents and pulse durations. Peak current, Ip within a range of 20A to 40A and pulse duration (or pulse on-time), ton within a range of 200μs to 400μs are selected as the main parameters. In this study, EWR were measured using digital weight balance (accuracy 0.01mg) and by using Scanning Electron Microscope (SEM), the surface texture of the electrode in order to evaluate the material deposited on the electrode surface. The results have shown that machining at a lowest peak current of 20A and highest pulse duration of 400μs yields the lowest electrode wear rate (EWR) of -0.01mm3/min. The pulse duration is significantly affecting the EWR. It also revealed that, the deposited of carbon and work piece material is occurred on the electrode surface for all machining conditions.
Publisher
Trans Tech Publications, Ltd.
Reference9 articles.
1. E. O Ezugwu: Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools & Manufacture Vol. 45 (2005), pp.1353-1367.
2. P. S. Bharti, S. Maheshwari, and C. Sharma: Experimental Investigation Of Inconel 718 During Die-Sinking Electric Discharge Machining. International Journal of Engineering Science and Technology Vol. 2(11) (2010), pp.6464-6473.
3. R. Kern: TechTips: Sinker Electrode Material Selection. EDM Today Vol. (July/August 2008 Issue).
4. A. Kumar, S. Maheshwari, C. Sharma, and N. Beri: Analysis of Machining Characteristics in Additive Mixed Electric Discharge Machining of Nickel-Based Super Alloy Inconel 718. Materials and Manufacturing Processes Vol. 26(8) (2011), pp.1011-1018.
5. D. V. Ghewade, and S. R. Nipanikar. Experimental Study of Electro Discharge Machining for Inconel Material. Journal of Engineering Research and Studies II (II/April-June, 2011): 107-112.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献