Effects of Sputtering Coating Factors on Elastic Modulus of MoN Coatings-Reference-Cited by-同舟云学术

Effects of Sputtering Coating Factors on Elastic Modulus of MoN Coatings

Published:2014-02 Issue: Volume:896 Page:249-252
ISSN:1662-8985
Container-title:Advanced Materials Research
language:
Short-container-title:AMR

Author:

Srisattayakul Parinya¹,Saikaew Charnnarong¹,Wisitsoraat Anurat²,Intanon Naphatara¹

Affiliation:

1. Khon Kaen University

2. National Electronics and Computer Technology Center

Abstract

Surface quality of an upper hook, an important fishing net-weaving machine component manufactured from stainless steel, was improved by systematically investigating the effects of sputtering coating factors using experimental design. Three factors of MoN coating on upper hooks including DC current, operating pressure, and Ar/N2 ratio were studied and optimized for maximum elastic modulus. It was found that the three coating factors affected the elastic modulus of the MoN coating on upper hooks. In addition, the optimal operating condition for MoN coating that produced a maximum elastic modulus was obtained at DC current of 0.35 A, operating pressure of 0.01 mbar, and Ar/N2 ratio of 1.5.

Publisher

Trans Tech Publications, Ltd.

Subject

General Engineering

Link

https://www.scientific.net/AMR.896.249.pdf

Reference10 articles.

1. Information on http: /www. fisheries. go. th.

2. V.P. Anitha, A. Bhattacharya, N.G. Patil, S. Major, Study of sputtered molybdenum nitride as a diffusion barrier, Int. J. Thin Solid Films. 236 (1993) 306-310.

3. Y.G. Shen, Effect of deposition conditions on mechanical stresses and microstructure of sputter-deposited molybdenum and reactively sputter-deposited molybdenum nitride films, Int. J. Mater. Sci. & Engineer. A. 359 (2003) 158-167.

4. T. Suszko, W. Gulbinski, J. Jagielski, The role of surface oxidation in friction processes on molybdenum nitride thin films, Surf. & Coat. Technol. 194 (2005) 319-324.

5. M.K. Kazmanli, M. Urgen, A.F. Cakir, Effect of nitrogen pressure, bias voltage and substrate temperature on the phase structure of Mo–N coatings produced by cathodic arc PVD, Surf. & Coat. Technol. 167 (2003) 77-82.

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Kinematics analysis and optimization of the lower hook mechanism in netting machine;Journal of Mechanical Science and Technology;2024-05

2. How to motivate students to do a course project in design of experiments course from a web-based virtual learning material?;International Journal of Lean Six Sigma;2022-01-11

3. Reciprocating two-body abrasive wear behavior of DC magnetron sputtered Mo-based coatings on hard-chrome plated AISI 316 stainless steel;Wear;2017-05

4. Deposition and characterisation of Mo2N/CrN multilayer coatings prepared by cathodic arc evaporation;Surface and Coatings Technology;2015-10

5. A Comparative Study on the Hardness of CrN, CrC and CrCN Coatings;Advanced Materials Research;2014-08-28