Affiliation:
1. Anhui Institute Architecture and Industry
2. Anhui Institute of Architecture & Industry
Abstract
In this paper, alumina ceramic samples were ablated with HGW-300 solid laser in sodium hydroxide solution medium. The morphology and structure of the ablated surface were investigated by SEM and XRD. The results show that, the mass loss increased with increased processing voltage. With the laser scanning speed increasing, the mass loss of alumina ceramic sample decreasing. While pulse width is 1.4ms, the mass loss of the sample gets maximum.When the repeat frequency is 40Hz, the mass loss of the sample in 20g/L sodium hydroxide solution reaches a maximum and then drops down. Corrosive medium can increase the mass loss of alumina. When the samples were tested in 20g/l sodium hydroxide solution, their mass losses is higher than in any other solutions.
Publisher
Trans Tech Publications, Ltd.
Reference7 articles.
1. Pan Hongping, Liang Yingchun: Tool Engineering Vol. 33(1999), pp.3-6(in Chinese).
2. Zhu Haihong, Lu Hong, Cheng Zuhai: Laser & Optoelectronics Process Vol. 43(2006), pp.59-63(in Chinese).
3. Hammonds J J S, Shannon M A: International Journal of Heat and Mass Transfer Vol. 46(2003), pp.523-534.
4. Lee CHEON, Takai MIKIO, Yada TOSHIRO: Appl. Phys. A: Solids and Surfaces Vol. 51(1990), pp.340-343.
5. Huang Chunfeng: Machinery Vol. 29(2002), pp.1-39(in Chinese).
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献