Affiliation:
1. Universidad Tecnológica de Pereira
Abstract
This paper illustrates the design and building of a planar transformer prototype with a 1:1 transformation ratio for high-frequency applications in power electronics. By using reference literature and considering the ferrite core dimensions, the windings were conceived and exported to Gerber format using PCB design software. The transformer prototype was then assembled and tested under laboratory conditions for frequencies from 800 Hz to 5 MHz, which showed a sinusoidal wave at the transformer output from 1.3 kHz onwards and a better performance starting at 10 kHz, where the loses were significantly reduced and the transformation ratio was closer to the originally designed. As a final step, a finite element method (FEM) análisis was carried out to understand the electromagnetic flux behavior using a 3D Multiphysics simulation software. The 3d building process and details are explained step by step and the resulting magnetic flux density is graphically shown for the core and the windings.
Publisher
Universidad Technologica de Bolivar
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献