First clinical experience with the automatic positioning system and Leksell gamma knife Model C

Abstract

✓ In May of 1999, the first Leksell Model C gamma knife was installed at the Gamma Knife Zentrum in Krefeld, Germany. The authors recount their experience with this latest technical gamma knife development. Until the end of 1999, extensive physical and technical tests were performed and the system's hardware and software were continuously improved and adapted to the user's needs. By the end of 1999, 163 GKSs had been performed using the new functionality of the Model C in manual or “trunnion” mode. The trunnions, the two parts of the system that fix the patient headframe to the gamma knife when the isocenter positions, are checked manually. During the same period the new automatic positioning system (APS) was extensively tested and refined so that the first APS treatment could be performed in January 2000. Fifty GKSs have been performed with the APS capability of the Model C. It was possible to use APS alone in 74% of surgeries whereas in 14% some shots were given with APS and some with trunnions. In 12%, GKS was scheduled and planned for APS, but due to unexpected technical (6%) or mechanical (6%) reasons the treatment had to be performed manually. At present there are some spatial restrictions with Model C in APS mode when compared with the Model B. The most significant restriction is the narrow space for the patient's shoulders, especially when deep-seated lesions are treated. Through mechanical changes of the APS motor housing and some modifications of and to the motor driven couch adjustment, these limitations will be reduced in the future. The APS treatment runs smoothly and fast. In no case did any relevant safety error occur during GKS. The more stringent mechanical limitations of the APS compared with the Model B means that frame placement on the head is more critical than before.